alproof
unload_sensor_jog
usj
Trendsetter_400/800_Proofing
This parameter was obsoleted and removed from the f/w in V1.0.
It is the distance to further unwind the proofing media from the drum to guarantee
coverage of the unload sensor.
The front edge of the media is past the pinch roller and just onto the unload
ramp before this jog takes place. Once the media is moved this distance, the
front edge of the media should be about 2 to 5 mm past the sensor in the unload
ramp.
uint8
10
0 to 100 mm
This jog only takes place when the sensors are enabled.
cal